the MassMind
...content heavy,
light sales...
NOTICE: This store is closing
Kits | Books | Gadgets | Cables | Services | Stepper Drivers
Products > Stepper Drivers > SLAm1: SLA 7062M Stepper Motor Driver kit

This item has been discontinued and is no longer available. Please see one of our other fine stepper drivers.

The SLAm Stepper, based on the Allegro SLA7062M, is a very quick and easy to build, 3 amp 40 volt per phase, chopper, unipolar stepper motor controller. With only 15 components, and a very friendly PCB, you can have your motors spinning quicker with this kit than just about any other.

Features:
Easiest to assemble (and most compact) SLA7062 driver on the market! Beginning soldering skills are all that is required.
1A to 3A unipolar motor capability
Real SLA7062M from Allegro (not a cheap knockoff)
Professional PCB with wide current paths, ground planes, etc...
Stainless terminal screwdown connectors
Mode switches On-board

Modes:
Half-step,
4th,
8th and
16th microstepping
(low power hold in any mode)

level: easy.
Picture of item #416056SLAm1:
SLA 7062M Stepper Motor Driver kit:
 $28.00 NONSTOCKED No longer available

Price breaks: @3 = $25.

You may also be interested in:
416015 *Linistepper (Smoother)
416074 *THB6064 Driver (more powerful)
416012 Connect to PC with
416016 Test/Run without PC

user @35.175.236.44, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Services, and these Stepper Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 1 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 2 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 3 in stock
4Axis5_pwr:5V regulator parts $2.00 2 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 5 in stock
6064A: Adapter cable Pololu $4.95 6 in stock
6064P: Stepper Motor Driver (PCB/SMT ONLY!) $10.95 42 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 Backordered!   Expected in 1 weeks