the MassMind
...content heavy,
light sales...
Kits | Books | Gadgets | Cables | Servo Components | Servicess | Motor Drivers
Products > Motor Drivers > 4Axis5_pwr:5V regulator parts

Kit of parts (only, use with PCB and your 8-12 volt unregulated supply) for the +5 volt regulator option. If your motor supply is more than +12V, or if you are running more than one axis driver, you should probably add a heatsink (it doesn''t take a big one) as the LM317 may get hot and shut down. If your only source of power is more than 12 volts, you can augment this kit by replacing the LM317 with a switching regulator like the Murata OKI-78SR-5/1.5-W36-C which can take up to 36 volts and still provide 1.5 amps at 5volts.

level: easy.
4Axis5_pwr:5V regulator parts $2.00 9 in stock

You may also be interested in:
416012 These are parts ONLY, use with PCB #

user @54.198.108.19, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Servo Components, Servicess, and these Motor Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 2 in stock
4Axis5_cHD:Cable for 4 drivers(1/4AXIS) PMinMO STD $4.95 3 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 7 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 1 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 6 in stock
6064A: Adapter cable Pololu $4.95 2 in stock
6064C: Stepper Motor Driver (CHIP ONLY!) $10.95 8 in stock
Picture of item #416015RULMS3:
LiniStepper Driver kit NEW V3!
:
 $25.00 3 in stock
RULMS3_AMP2: Sense resistor set: 2 AMPS (1/AXIS) $1.00 9 in stock
RULMS3_FAN2:Heatsink/Fan YOU drill & tap (1/AXIS) $5.00 12 in stock
RULMS3_PCB: Linistepper V3 PCB ONLY $9.00 9 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 6 in stock
RULMS3_Q1-8: Drive Transisor set (1/AXIS) $5.95 1 in stock
RULMST_PIC: Lini_Telescope uC (Chip ONLY!) $19.95 1 in stock