Also:
The single largest challenge with the use of any sensor is conditioning the signal derived from it. Almost no sensor will produce a perfect, linear, scaled output in response to stimulii over all ranges of operation. Signal conditioners must compensate for non-linearity, offset, and the effects of temperature, voltage or other variations in the operating environment.
See also:
file: /Techref/io/sensors.htm, 4KB, , updated: 2020/10/21 09:15, local time: 2024/11/5 06:27,
3.135.190.135:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/io/sensors.htm"> Sensors</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.