Pressure Sensors

Strain@ Weight@

Measuring air pressure from human breath

Russell McMahon suggests

• Strain gauge Fairly cheap Needs extra instrumentation.
• Bimorph Piezo elements (Radio Shack has these)
• Smothered hot wire? Just a thought - a heated resistive element whose ability to cool is reduced as key is depressed against a spring.
• Spring with optical obscuration as key descends. Could be quite cheap. Use eg LED source and LDR (!) or phototransistor plus a shaped mask which progressively obscures light path.
• Crimping a pipe with airflow therein. plastic / rubber / ??? Or block / open an orifice as key moves. Could be very small at key itself Needs air source and pressure sensor. If this is for University experimental use rather than production purposes this could be quite viable. A fishtank air puimp good for a few psi can be bought for about $NZ10 (20?) This could supply a number of switches - especially if the key opens rather than closes an orifice. Airflow might also be able to be measured by "interesting" means - eg turbine/interrupter. Pressure driven pot? - getting desperate now :-)
• Linear pot spring loaded.
• Capacitance !!!! (or other proximity) Could eg drive oscillator and measure frequency.
• Linear Hall switch and magnet.

Archive:

• PICList post "Weather Sensors?"
• PICList post "Weather Sensors?"

Annie Ogborn says: I just had a discussion with a coworker about piezo devices. He emphasized checking temperature range before applying one, they have narrow temp. bands
+

  .