The HP 5, 5P, 5Si and 6P series printers (or their corresponding M versions) each require a specific version of the SmartSIMM. Please specify printer model when ordering.
SmartSIMMs which can be programmed in the LaserJet 5 or 5M now are available; however, LaserJet 4-series SmartSIMMs programmed in the LaserJet 4 series printers also can be installed in the 5 or 5M and the data on the SIMM can be used (read) to print while in the 5 or 5M. The new firmware version that supports reading and programming of data in the 5 was made available in early May, 1997 and is incorporated in all SIMMs sold specifically for the 5.
The HP Forms and Fonts Manager supports a different type of Flash SIMM when set to work with a LaserJet 5. Again, the LaserJet 5 FLASH setting in the HP Forms and Fonts Manager is not for a smart SIMM. If you need to program forms or fonts into a SmartSIMM in the LaserJet 5, use Transform's File / Print / RAM-FLASH-DISK / Admin option, not HP Forms and Font Manager
Number: 612 11/10/97 "INV PERS" or "INVALID PERSONALITY" when attempting to program forms to Smart SIMM
Number: 640 01/07/98 Areas of a form that are designed to print in a grey shade print black instead.
See also:
| file: /Techref/printer/lj5.htm, 1KB, , updated: 2003/8/18 17:24, local time: 2024/12/17 18:06,
3.144.90.194:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/printer/lj5.htm"> Hewlett Packard Laser Jet 5 or 5M Printer</A> |
| Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.