please dont rip this site

Wagner Lipnharski says:

A ringing detection, and audio coupling circuit can be done easily: When a ring comes, the AC signal 60V 20Hz feeds the opto-coupler LED and the -RING signal goes to ground, the microcontroller senses it and drives the relay that closes and connects the 600 Ohms phone transformer to the line. For most applications, the ringing sensing circuit (capacitor, zeners, ...) does not interfere so much in the common phone line usage for voice or data, if still connected in parallel. If you want, you can use a SPDT relay and switch the phone line *from* the ringing sensing circuit to the phone transformer, but it is not strictly necessary. Of course there are circuits that can do all of the below easily, but as usual, at cost of more dollars.
phone line
o---------o--------------------o    o-------------.    
          |                    ------             |     .-----> 
         ---  0.22µFx250V      relay              |     |
         ---  0.47µFx250V                         'S | S'
          |                             600 Ohms   S | S  600 Ohms
          |                                        S | S
          V  Zener 22V                            .S | S.
         ---                                      |     |
          |                                       |     '----->
         ---                        o +5V         |
          A  Zener 22V              |             |
          |                         |             | 
          |                         R 10 kOhms    |
 2 kOhms  R                         R             |
          R                         |             |
          |         opto coupler    |             |
          o-------.   4N35  .-------o---->        |
          |       |         |          -RING      |
         ---      V __--> |/                      | 
  1N4007  A      ---      |\e-.                   |
          |       |           |                   |
          o-------'           |                   |
          |                  GND                  |
          |                                       |
o---------o---------------------------------------'
phone line


file: /Techref/pots/interface.htm, 2KB, , updated: 2001/10/12 23:57, local time: 2024/12/4 10:18,
TOP NEW HELP FIND: 
18.97.9.170:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/pots/interface.htm"> pots interface</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .