cheap pcb fabrication needed
Marc Nicholas email (remove spam text)
Olimex is likely a decent choice given you're in Europe and they're
reasonably priced. Their DRC can be hard to pass for a first-timer, though.
Cadsoft make a free (for non-commercial) tool called EAGLE. http://www.cadsoft.de.
Were you planning on trying to do your PCB in Turbocad? I'd advise against
it unless you're doing a very simple/wide track board that you can
photoresist yourself. My first board was 10mil!
On 4/19/06, yahoo.co.uk < nicholasdattyahoo.co.uk> wrote: nicholasdatt
In reply to: <001101c6641a$cf5bb920$0202a8c0@pc1>
See also: techref.massmind.org/techref/pcbs.htm?key=pcb