Searching \ for 'stepper motor control' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: techref.massmind.org/techref/io/steppers.htm?key=stepper
Search entire site for: 'stepper motor control'.

Truncated match.
PICList Thread
'stepper motor control'
1998\05\13@152528 by PIC development

flavicon
picon face
People,

I have put up a description of a stepper motor controller
that I developed. It uses a  12c509 to give half-step
resolution for small motors.

http://www.beowulf.demon.co.uk/stepper.html

for the circuit and code

Pete

..............................................................................
. Never trust a man who, when left alone in ....... Pete Lynch               .
. a room with a tea cosy, doesn't try it on ....... Marlow, England          .
..........Billy Connolly. ......................... spam_OUTpicTakeThisOuTspambeowulf.demon.co.uk ..

1998\05\13@160517 by Sean Breheny

face picon face
At 07:23 PM 5/13/98 +0000, you wrote:
>People,
>
>I have put up a description of a stepper motor controller
>that I developed. It uses a  12c509 to give half-step
>resolution for small motors.
>
>http://www.beowulf.demon.co.uk/stepper.html
>
>for the circuit and code
>
>Pete


Hi Pete,

This sure is an interesting and simple circuit. I hope you are joking when
you say:
(this code is NOT certified year 2000 compliant) :)


Sean

+--------------------------------+
| Sean Breheny                   |
| Amateur Radio Callsign: KA3YXM |
| Electrical Engineering Student |
+--------------------------------+
Save lives, please look at
http://www.all.org

Personal page: http://www.people.cornell.edu/pages/shb7
.....shb7KILLspamspam@spam@cornell.edu
Phone(USA): (607) 253-0315


'Stepper Motor Control'
2000\01\19@074831 by Andy Bassam
flavicon
face
I am attempting to control a basic stepper motor.  I was wondering
if any one had any relevant coding or information of how i would go
about it.

Regards

Andy Bassam

2000\01\19@095759 by Dan Creagan

flavicon
face
Andy,

In August, Thomas McGahee wrote a very good summary to the PicList of how to
control a stepper.  Look in the PIC archives and enjoy.
http://www.infosite.com/~jkeyzer/piclist/1999/Aug/author.html

You might want to go to the subject listing of the archives and follow the
whole thread on steppers for that month.

Dan



> I am attempting to control a basic stepper motor.  I was wondering
> if any one had any relevant coding or information of how i would go
> about it.
>
> Regards
>
> Andy Bassam

More... (looser matching)
- Last day of these posts
- In 2000 , 2001 only
- Today
- New search...