'recommended ICE for pic parts inparticularly the 1'
Don't know if this has been asked before. What In-Circuit Emulator would
you recommend for the 16CXX and 17CXX Microchip parts. Is the Mplab ICE
-2000 the best way to go. Or would you guys recommend a thrid-party. Cost
not an issue.
Thanks in advance.
At 02:34 PM 4/7/99 -0400, you wrote:
>Don't know if this has been asked before. What In-Circuit Emulator would
>you recommend for the 16CXX and 17CXX Microchip parts. Is the Mplab ICE
>-2000 the best way to go. Or would you guys recommend a thrid-party. Cost
>not an issue.
I wholeheartedly recommend the Tech Tools Mathias.
It is priced reasonably.
Tech support is fantastic (e-mail several times a day sometimes).
Supports all 12-bit and 14-bit core chips.
Uses internal PLL for OSC frequency.
_VERY_ good interface.
Quick change of emulation makes multi-project support very easy.
My recommendation for the RICE17 is to negate all the above comments: It
is expensive, tech support is horrible if you get any at all, supports all
the chips (even the 17C) [OK, so they have _one_ advantage], requires
external parts for anything but a handful of frequencies, and the IDE is
counter-intuitive. You must also open the unit up to change emulations.
More... (looser matching)
- Last day of these posts
- In 1999
, 2000 only
- New search...