Anil Patel wrote:
{Quote hidden}>
> I'd like to program 16C73A devices with my PIC84PGM programmer (Don
> McKenzie). I am planning on building up a 28-pin ZIF socket to connect to
> the 10-pin header that is included on the PIC84PGM programmer. If I
> understand correctly, I'll need to wire up the RB7, RB6, VCC, GND, and MCLR
> pins from the 10-pin header to the appropriate positions on the 28-pin ZIF
> socket.
>
> I'd like to know what I should use to program the part. I've been using the
> PICPROG programming software (Nigel Goodwin) with success to program 16C84
> parts, but I assume this software won't work for EPROM parts since the
> timing for programming will be different.
>
> I looked at the PGM16CXX software (Ken Segler) and it looks like it will
> program 16c73 parts, but I'm worried about the additional code protect bits
> in the 16c73a part and wondering what this programmer will do with them
> since it doesn't list the 16c73a part specifically.
>
> Thanks,
> --Anil
No Nigel Goodwin's software will only do 84's, but very nicely.
I have spoken to Nigel recently about catering for the F84, however I
think all he really needs is a device to try.
Ken Segler's software last count, didn't cater for the two code protect
bits. I sent him Email about this a long time ago, but haven't heard
anything back. Still with us Ken?
Octavio Nogueira (TATO Computers) last time I looked, didn't support it
either, however I think he has some 'A' parts support. Perhaps he will
reply to this and update us.
Antti Lukats (SiStudio) doesn't support it yet in his PIP02 driver. Rest
assured I have prompted him about this and the F84 support.
I know that the 'A' parts are gradually replacing the old versions. I
can no longer get non-'A' PIC16C74/JW parts.
I wonder if the same thing will happen with the C84.
Sorry I couldn't give you anything positive on the Davit Tait type
programmer software upgrades. Perhaps someone else can. Maybe even David
knows. :)
As new devices come out, you can rest assured the saga will continue. :)
At:
http://dontronics.com/hints.html
you will find the wiring of the header to the 28 pin socket.
Also the combination of my DT.001 board, (updated PIC84PGM) and a
PIC.003 SimmStick board will do this job for you.
Don McKenzie spam_OUTdonTakeThisOuT
dontronics.com http://www.dontronics.com
SLI, the serial LCD that auto detects baud rates from 100 to 125K bps.
SimmStick(tm) A PIC proto PCB the size of a 30 pin Simm Memory Module.
Covers all versions of the PIC16cxx family plus the Atmel AT89C2051.
