Searching \ for 'PIC16C71 for a real newbie' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: techref.massmind.org/techref/microchip/begin.htm?key=16C
Search entire site for: 'PIC16C71 for a real newbie'.

Truncated match.
PICList Thread
'PIC16C71 for a real newbie'
1996\12\03@061411 by Kerzer Computers

flavicon
face
I  need the hardware ( schematics ) and software to program these things. Can
someone help me please ? will the one  for the c84 work ?

Gordon

1996\12\03@064401 by Antti Lukats

flavicon
face
At 01:16 PM 12/3/96 +0200, you wrote:
>I  need the hardware ( schematics ) and software to program these things. Can
>someone help me please ? will the one  for the c84 work ?

programmer hardware will, if it guarantees >= 12VPP prog voltage.
PIC16C84 programming software will not. Algorithms are different.

there are many programs that program C71 with and C84 programmer hardware

You can build ProPic and use software from TATO computers,
or you can build any DIY programmer and use our PIP02 software.

antti
-- Silicon Studio Ltd.
-- http://www.sistudio.com

1996\12\03@065020 by Kerzer Computers

flavicon
face
great, where do I get it from ? thanks for the reply

Gordon

1996\12\03@123620 by ta2cba

flavicon
picon face
Hi Gordon,

Use propic from noguiera or an589 with antti's soft pip-02.

I can't remember their www address by heart but you can get it from
their
mails in piclist.

Barbaros



~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Barbaros ASUROGLU - TA2CBA      AMPR GATEWAY : 44.176.1.1

Member Of ANTRAK - Amateur Radio Club Of ANKARA - TURKEY

Home Page: http://www.antrak.org.tr/~antrak

mail to: spam_OUTta2cbaTakeThisOuTspamampr-gw.metu.edu.tr

mail to: .....ta2cbaKILLspamspam@spam@antrak.org.tr
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1996\12\03@150542 by Franco
flavicon
face
Kerzer Computers wrote:
>
> I  need the hardware ( schematics ) and software to program these things. Can
> someone help me please ? will the one  for the c84 work ?
>
> Gordon
Try this site:
========================================================
Octavio Nogueira
e-mail:   nogueiraspamKILLspammandic.com.br
homepage: http://ourworld.compuserve.com/homepages/tato
voice/fax: +55 11 240-6474
"ProPic" The first Production PIC Programmer running in
Windows and under US$ 20.00.
========================================================
Good luck and take care.
Frank

1996\12\18@095036 by Kerzer Computers

flavicon
face
I  need a 'barebones' kinda program to initialise and program my PIC. I have
done no programming at all yet, and so I need some code I can learn with and
or use. I would be greatful if anyone could E-mail me direct with some good
code that I could use to maybe set the chip up and initialise etc.

Gordon

More... (looser matching)
- Last day of these posts
- In 1996 , 1997 only
- Today
- New search...