>Date: Wed, 25 Nov 1998 01:05:47 -0500
>To: spam_OUTjohn_gTakeThisOuT
cibolo.com
>From: Steve Tomes <.....stevetomKILLspam@spam@gate.net>
>Subject: Daylight negative Process
>
>I originally purchased a starters kit 3 or 4 years ago....still only used
half of supplies and have made a lot of negatives...I make a lot of
mistakes!!!....
>They sold a "starter/sampling Kit fo @ $50...that is what I bought...love it!
>They sent a plastic board to wash and rince on...a bottle of
activator..and a package of film..50 sheets 9X12.. I juyst print with my
laser printer on a sheet of acetate..and use the acetate face down on a
sheet of negative.. (scratchable side up) Expose to bright sun light @4
min or to a UV source...I built a frame to expose two sides at once....(8
mini tube bulbs each side).....A 5 min max exposure. After exposure you
just spray on activator...wait 1 minute and then slowly and lightly rub off
the un-exposed emulsion.....with just a little pratcise you can get really
good resultys...I have done down to a size .008 line with care!!
>
>IDEAL
>DAYLIGHT AQ (tm).....AQ Activates...spray bottle
>FILM: Daylight AQ...Product # 912-50....50 sheets /high resolution
platemaking negatives 9"X12"
{Quote hidden}>
>M&R Marketing
>100 Springfield Ave.
>Piscataway, N.J 08855-6969...USA
>
>908-562-9500
>908-562-9515 Fax
>1-800-272-8550 orders dept.
> A good uv source is really helpful!
>good luck...any Q's
...stevetomKILLspamgate.net
