Searching \ for 'Config Bits...' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: techref.massmind.org/techref/index.htm?key=config+bits
Search entire site for: 'Config Bits...'.

Truncated match.
PICList Thread
'Config Bits...'
1997\03\03@163904 by l Curtis Bennett

flavicon
face
Okay, this is probably a stupid question, but I was
wondering how to set the config bits (for a 16c84 --
doesn't matter which, just the general idea).

In the Microchip data book, it says that they are
set via a 'special mode' during programming.

Does this mean you set them manually while using a
programmer?  Or can/do you set them in the source
code?

(I know this is MUCH easier than it seems...)

Paul Bennett
spam_OUTpbennettTakeThisOuTspamkilby.elee.calpoly.edu

Robotic Building Priciples:
1)  If it isn't nailed down, it's a potential robot part
2)  If it is nailed down, find a prybar, then refer to 1

1997\03\04@001347 by Dennis Frost

flavicon
face
They can be set using the programmers front end software or by using the
following in you source code:

       __CONFIG        _XT_OSC & _WDT_ON & _PWRTE_OFF & _CP_OFF

This will be compiled into your hex file & any intelligent programmer will
pick it up.

----------
{Quote hidden}

1997\03\04@030031 by John Dammeyer

flavicon
face
At 07:09 AM 04/03/1997 +0200, you wrote:
>They can be set using the programmers front end software or by using the
>following in you source code:
>
>        __CONFIG        _XT_OSC & _WDT_ON & _PWRTE_OFF & _CP_OFF
>
>This will be compiled into your hex file & any intelligent programmer will
>pick it up.


All except ICE Technologies in England.  I now have a $1500 MM1000 boat
anchor in regards to PIC programming.  Their advertising literature spoke of
upgradability so I bought into that.  Seems now that they were busy
designing a newer non-compatible version while selling off the older one.
Guess what?  They only support the new unit new device upgrades.  Wouldn't
recomend that company to anyone.

John

{Quote hidden}

Pioneers are the ones, face down in the mud,
with arrows in their backs.
Automation Artisans Inc.      Ph. 1-250-544-4950
PO Box 20002                  Fax 1-250-544-4954
Sidney, BC CANADA V8L 5C9

More... (looser matching)
- Last day of these posts
- In 1997 , 1998 only
- Today
- New search...