'Calculator LCD repurposing?'
Alan B. Pearce
>If not, I'll see about reverse engineering the pinout at
>some point. I guess the best method would be to generate
>a 3V 50Hz square wave to use as the backplane signal, then
>feed it through an inverter to get the segment signal.
I would start by looking at it at an angle in a suitable bright light so you
can see the metalisation pattern on the glass, to work out where the segment
lines come out.
More... (looser matching)
- Last day of these posts
- In 2006
, 2007 only
- New search...