'16f84 Vdd range'
wouter van ooijen
The 16f84 datasheet states (p72) A 4.0-6.0 range for a 16f84-04 and a
4.5-5.5 range for the 16f84-10, both in XT mode.
On the next page however(16f84 without speed indication) the range is
4.0-6.0 for XT mode.
What is correct?
On Fri, 13 Mar 1998 21:15:59 +0100 wouter van ooijen <XS4ALL.NL> wf
>The 16f84 datasheet states (p72) A 4.0-6.0 range for a 16f84-04 and a
>4.5-5.5 range for the 16f84-10, both in XT mode.
>On the next page however(16f84 without speed indication) the range is
>4.0-6.0 for XT mode.
If the PIC16F84 is to operate above 4 MHz, officially you need a -10
chip, and a power supply from 4.5 to 5.5 V. At 4 MHz or below, either a
-10 or -04 chip will work, and the power supply range is extended to
4.0-6.0 V. The -10 chip is not recommended for the LP mode (below 200
KHz), but it will usually work there.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
More... (looser matching)
- Last day of these posts
- In 1998
, 1999 only
- New search...