Post by thread:[ad]: Re: Where is the best PIC NiCd charger?

And why don't you tell them that the LCD code was developed for a PIC in C and ported to the 805x? Mark Skeels <spam_OUTmeskeelsTakeThisOuTEARTHLINK.NET> on 01/16/2001 04:03:44 PM Please respond to pic microcontroller discussion list <.....PICLISTKILLspam@spam@MITVMA.MIT.EDU> To: PICLISTKILLspamMITVMA.MIT.EDU cc: (bcc: Andrew Kunz/TDI_NOTES) Subject: [ad]: Re: Where is the best PIC NiCd charger? If your not allergic to 805x then perhaps you'd be interested in our new "Pitbull." Coming to a hobby shop near you in February... .150 to 7 amps charge current, 2 selectable cycles with eeprom parm storage, peak detect volts settable .012v - .192v in 4 mV increments. Gives peak pack voltage, mWHr, mAHr. Programmable sounds and display effects. 2x16 char backlit LCD display. SMPS technology. 4 - 8 cells. Uses a 12c509 for sound effects. If you want more capability and a discharge cycle as well, check out http://www.competitionelectronics.com and look at the TurboMatcher 4 and the Turbo 35. To create large battery testing and matching systems, check out the TurboLabel program. Regards, Mark Skeels Engineer Competition Electronics .....meskeelsKILLspam.....earthlink.net Soli Deo Gloria! {Original Message removed}

I hereby credit Andrew Kunz with the LCD code (although highly modified... :-)) Mark ----- Original Message ----- From: "Andrew Kunz" <EraseMEakunzspam_OUTTakeThisOuTTDIPOWER.COM> To: <PICLISTspam_OUTMITVMA.MIT.EDU> Sent: Tuesday, January 16, 2001 3:21 PM Subject: Re: [ad]: Re: Where is the best PIC NiCd charger? > And why don't you tell them that the LCD code was developed for a PIC in C and {Quote hidden}> ported to the 805x? > > > > > > > > > > > > Mark Skeels <@spam@meskeelsKILLspamEARTHLINK.NET> on 01/16/2001 04:03:44 PM > > Please respond to pic microcontroller discussion list <KILLspamPICLISTKILLspamMITVMA.MIT.EDU> {Quote hidden}> > > > > > > > > To: RemoveMEPICLISTTakeThisOuTMITVMA.MIT.EDU > > cc: (bcc: Andrew Kunz/TDI_NOTES) > > > > Subject: [ad]: Re: Where is the best PIC NiCd charger? > > > > > > > > > If your not allergic to 805x then perhaps you'd be interested in our new > "Pitbull." > > Coming to a hobby shop near you in February... > > .150 to 7 amps charge current, 2 selectable cycles with eeprom parm storage, {Quote hidden}> peak detect volts settable .012v - .192v in 4 mV increments. > > Gives peak pack voltage, mWHr, mAHr. Programmable sounds and display > effects. > > 2x16 char backlit LCD display. SMPS technology. > > 4 - 8 cells. > > Uses a 12c509 for sound effects. > > If you want more capability and a discharge cycle as well, check out > > http://www.competitionelectronics.com > > and look at the TurboMatcher 4 and the Turbo 35. > > To create large battery testing and matching systems, check out the > TurboLabel program. > > Regards, > > Mark Skeels > Engineer > Competition Electronics > spamBeGonemeskeelsspamBeGoneearthlink.net > > Soli Deo Gloria! > > > ----- Original Message ----- > From: "Scott Stephens" <TakeThisOuTScott2EraseMEspam_OUTMEDIAONE.NET> > To: <RemoveMEPICLISTTakeThisOuTMITVMA.MIT.EDU> > Sent: Tuesday, January 16, 2001 1:33 PM > Subject: Where is the best PIC NiCd charger? > > > > I did a web search and found an F84 based charger > > (http://home.wxs.nl/~j.havinga/BattCharger/BattCharger.htm), but it didn't {Quote hidden}> > calculate cell capacity or discharge cells. So has anyone released a PIC > > NiCd charger design that can fast or pulse charge various numbers of > cells? > > > > Scott > > > > -- > > http://www.piclist.com hint: To leave the PICList > > piclist-unsubscribe-requestEraseME.....mitvma.mit.edu> > > > > > > > > -- > http://www.piclist.com hint: To leave the PICList > EraseMEpiclist-unsubscribe-requestmitvma.mit.edu > > -- > http://www.piclist.com hint: To leave the PICList > RemoveMEpiclist-unsubscribe-requestEraseMEEraseMEmitvma.mit.edu > > > -- http://www.piclist.com hint: To leave the PICList RemoveMEpiclist-unsubscribe-requestspam_OUTKILLspammitvma.mit.edu