Post by thread:[PICLIST] Please help : Problems with ICD- Hardwar

Hi, does anybody know what is the configuration that MPLAB-ICD needs in the Serial port for connecting to the ICD Debugger. I have built it and it seems to work (the led flashes showing that there's no connection) but the MPLAB doesn't see the Hard. I use the following config : 19200bps, data bits = 8 parity = none stop = 1 bit flux control : hardware and I have disabled the FIFO buffer I think that is all Microchip says but it doen't connect. does anybody know what can happen ? thanks david -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

I run mine off Comm1 at 9600, 8, N, 1 and no flow control. Works for me... -----Original Message----- From: David Gomez Otero [spam_OUTdavid.gomezTakeThisOuTUPCNET.ES] Sent: Wednesday, January 17, 2001 12:37 PM To: .....PICLISTKILLspam@spam@MITVMA.MIT.EDU Subject: Please help : Problems with ICD- Hardware Hi, does anybody know what is the configuration that MPLAB-ICD needs in the Serial port for connecting to the ICD Debugger. I have built it and it seems to work (the led flashes showing that there's no connection) but the MPLAB doesn't see the Hard. I use the following config : 19200bps, data bits = 8 parity = none stop = 1 bit flux control : hardware and I have disabled the FIFO buffer I think that is all Microchip says but it doen't connect. does anybody know what can happen ? thanks david -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads

but, in the MPLAB ICD window you can only choose between 19600 bps and 57600bps ??? by the way, have you built your own ICD ??? ----- Original Message ----- From: Duane Brantley <Duane.BrantleyKILLspamGENBAND.COM> To: <.....PICLISTKILLspam.....MITVMA.MIT.EDU> Sent: Wednesday, January 17, 2001 7:39 PM Subject: Re: Please help : Problems with ICD- Hardware > I run mine off Comm1 at 9600, 8, N, 1 and no flow control. Works for me... > > {Original Message removed}

I don't think it's the actual speed that's the culprit here. How did you build it ? I xerox'ed :) mine from the protoboard accompanying the icd. ( almost anyway ) I added an socket for oscillator and max203E but that is ofcource flavor dependant. Anyway here is my connections: Mod. conn PIC -------- -------- 1 RB3 2 RB6 3 RB7 4 Vss ( GND ), Diode to pin 5 in modular connector 5 Vdd ( +V ) 6 Vpp/MCLR, Pullup 47k to Vdd I think they are ok ( could be reversed on the modular connector ). Note the pullup on MCLR !! ( this could ofcource be placed on the target ) /Tony Tony Kübek, Flintab AB ²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²² E-mail: EraseMEtony.kubekspam_OUTTakeThisOuTflintab.com ²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²²² -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

I have copied the exact schematic from microchip. david ----- Original Message ----- From: K|bek Tony <tony.kubekspam_OUTFLINTAB.COM> To: <@spam@PICLISTKILLspamMITVMA.MIT.EDU> Sent: Thursday, January 18, 2001 10:07 AM Subject: Re: Please help : Problems with ICD- Hardware I don't think it's the actual speed that's the culprit here. How did you build it ? I xerox'ed :) mine from the protoboard accompanying the icd. ( almost anyway ) I added an socket for oscillator and max203E but that is ofcource flavor dependant. Anyway here is my connections: Mod. conn PIC -------- -------- 1 RB3 2 RB6 3 RB7 4 Vss ( GND ), Diode to pin 5 in modular connector 5 Vdd ( +V ) 6 Vpp/MCLR, Pullup 47k to Vdd I think they are ok ( could be reversed on the modular connector ). Note the pullup on MCLR !! ( this could ofcource be placed on the target ) /Tony Tony K|bek, Flintab AB 222222222222222222222222222222222222222222222222222222222222 E-mail: KILLspamtony.kubekKILLspamflintab.com 222222222222222222222222222222222222222222222222222222222222 -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics

In-Reply-To: <029501c080b8$5623d2e0$2486a6d4@spock> In-Reply-To: <029501c080b8$5623d2e0$2486a6d4@spock> David Gomez Otero <RemoveMEdavid.gomezTakeThisOuTUPCNET.ES> wrote: > but, in the MPLAB ICD window you can only choose between 19600 bps and > 57600bps ??? The ICD should work at either 19200 or 57600. It adjusts automatically. Brian Gregory. spamBeGonebriangspamBeGonecix.compulink.co.uk -- http://www.piclist.com hint: The list server can filter out subtopics (like ads or off topics) for you. See http://www.piclist.com/#topics