Post by thread:[PIC]: Should this be happening with my ports?

On the 16c65b problem I mentioned, I've tried merely changing the port assignments between B C and D, which all together make up my two 12 input channels, two of the 3 being read in full as 8 bits, and the third port being split as 4 bits for channel 1 and 4 bits for channel 2. All 3 of those ports are set as inputs, so shouldn't the assumption hold that if I simply reassign them within a program, the result should be the same? ie swapping portB and portC in the program shouldn't matter because they're both input ports, so as long as I treat them as swapped in hardware as well, all should work out fine. But that's not the case. I tried several combinations of swapping B C and D, and every combination behaved differently, with no combination being proper at all. What could be wrong here? -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! use spam_OUTlistservTakeThisOuTmitvma.mit.edu?body=SET%20PICList%20DIGEST