Post by thread:[PIC]: Adapter for PIC17C766 + PICStart Plus

Hey, I like program an PIC17C766 and I have a PICStart Plus. But with PICStart Plus I can't program it because it is in PLCC84 package. But I can use an adapter (PLCC84 to DIP40) and it cost US$ 159,00 on Digikey. I'm decided to assembly it yourself, but I haven't schematic form this adapter. Could help me? Thank's, Paulo Ricardo Pabst Projects Coordinator POLLUX - Machine Vision Systems Technology Division - Joinville - SC Brazil Phone: 55 047 441-7755 Fax: 55 047 441-7754 spam_OUTpaulo.pabstTakeThisOuTpollux.com.br visit our website: http://www.pollux.com.br PS.: sorry my english! :) -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email .....listservKILLspam@spam@mitvma.mit.edu with SET PICList DIGEST in the body

Try to compare the pinouts of each socket. Then you can design the PCB yourself, if you know where each pin goes. Made my point here ?? Sena {Quote hidden}> Hey, > > I like program an PIC17C766 and I have a PICStart Plus. But with > PICStart Plus I can't program it because it is in PLCC84 package. But I can > use an adapter (PLCC84 to DIP40) and it cost US$ 159,00 on Digikey. > I'm decided to assembly it yourself, but I haven't schematic form this > adapter. Could help me? > > > Thank's, > Paulo Ricardo Pabst ********************************************************* Antonio Sergio Sena CT2GPW asenaKILLspambigfoot.com BEng Electrical & Electronic Engineering Heriot-Watt University - Edinburgh Homepage: http://www.qsl.net/ct2gpw ********************************************************* Do NOT send unsolicited commercial email to this email address. This message neither grants consent to receive unsolicited commercial email nor is intended to solicit commercial email. -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email .....listservKILLspam.....mitvma.mit.edu with SET PICList DIGEST in the body

> I like program an PIC17C766 and I have a PICStart Plus. But with > PICStart Plus I can't program it because it is in PLCC84 package. But I can > use an adapter (PLCC84 to DIP40) and it cost US$ 159,00 on Digikey. > I'm decided to assembly it yourself, but I haven't schematic form this > adapter. Could help me? Is this a professional or a hobby project. If professional, $160 is a bargain compared to your time to wire is yourself and then wasting more time trying to figure out why it's not working. ******************************************************************** Olin Lathrop, embedded systems consultant in Littleton Massachusetts (978) 742-9014, EraseMEolinspam_OUTTakeThisOuTembedinc.com, http://www.embedinc.com -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email listservspam_OUTmitvma.mit.edu with SET PICList DIGEST in the body

At 04:27 PM 10/2/01 -0300, you wrote: >Hey, > > I like program an PIC17C766 and I have a PICStart Plus. But with >PICStart Plus I can't program it because it is in PLCC84 package. But I can >use an adapter (PLCC84 to DIP40) and it cost US$ 159,00 on Digikey. > I'm decided to assembly it yourself, but I haven't schematic form this >adapter. Could help me? The price isn't so bad if you're going to be buying a proper ZIF PLCC socket. I just bought one for a project, didn't think it was all that bad. If you're going to be using a PLCC socket (which would only be good for a small number of uses), there are about 26 wires used on the 40-pin header. Best regards, Spehro Pefhany --"it's the network..." "The Journey is the reward" @spam@speffKILLspaminterlog.com Info for manufacturers: http://www.trexon.com Embedded software/hardware/analog Info for designers: http://www.speff.com /.-.\ (( * )) \\ // Please help if you can: \\\ dailynews.yahoo.com/fc/US/Emergency_Information/ //\\\ /// \\\ \/ \/ -- http://www.piclist.com#nomail Going offline? Don't AutoReply us! email KILLspamlistservKILLspammitvma.mit.edu with SET PICList DIGEST in the body

Hi Paulo, Have a look at www.rz.tu-ilmenau.de/~seeadler/electron/pic_adap/adapter.htm It has a schematic and PCB layout for an adapter for a PIC17C57X + PICStart Plus, but I have not checked to see if it is correct. I think that it would program all of the PIC17CXXX's because I assume it is wired the same as the Microchip adapter that does all the PIC17CXXX's. Simon Paulo Ricardo Pabst wrote: {Quote hidden}> > Hey, > > I like program an PIC17C766 and I have a PICStart Plus. But with > PICStart Plus I can't program it because it is in PLCC84 package. But I can > use an adapter (PLCC84 to DIP40) and it cost US$ 159,00 on Digikey. > I'm decided to assembly it yourself, but I haven't schematic form this > adapter. Could help me? > > Thank's, > > Paulo Ricardo Pabst > Projects Coordinator > POLLUX - Machine Vision Systems > Technology Division - Joinville - SC > Brazil > Phone: 55 047 441-7755 > Fax: 55 047 441-7754 > RemoveMEpaulo.pabstTakeThisOuTpollux.com.br > visit our website: http://www.pollux.com.br > > PS.: sorry my english! :) > > -- > http://www.piclist.com#nomail Going offline? Don't AutoReply us! > email spamBeGonelistservspamBeGonemitvma.mit.edu with SET PICList DIGEST in the body -- http://www.piclist.com hint: PICList Posts must start with ONE topic: [PIC]:,[SX]:,[AVR]: ->uP ONLY! [EE]:,[OT]: ->Other [BUY]:,[AD]: ->Ads