Exact match. Not showing close matches.
'[OT] windows terminal- output?'
|On Sun, 3 May 1998 17:46:45 -0400 Bill Kennedy <FRONTIERNET.NET> hue
> Anyone know what windows 3.1 terminal program actually sends out
Unless it is very strangely configured, it sends ASCII characters. The
ASCII code for '0' is 0x30 and the ASCII code for '9' is 0x39.
I am trying to send data characters 0-9, but don't quite
>recognize what I see on the scope. I've set up communications setting
On a RS-232 line, zero bits are + voltage (typically 5 to 12V) and one
bits are -voltage (typically -5 to -12V). Each bit stays at the
designated voltage for the duration of 1/baud rate, then the next bit is
sent immediately. When no data is being sent, the line idles at -
voltage. Before each character of data is sent, a 'start bit' of one bit
duration of + voltage is sent. The data comes out LSB first. After the
last bit, the line stays at - voltage for at least one bit time (the
So if you type '1', which is ASCII 0x31 or 0110001 binary, the RS-232
signal would be:
which would look like -_---__-_ on an oscilloscope (with no gaps). Set
the scope to trigger on a rising edge and it should catch the start of
the start bit.
S = start bit, K = stop bit. After the sequence, the line may stay at -
voltage if there is nothing more to send, or a new start bit and
character may immediately follow.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
Thanks for the help!! It was much needed and appreciated!
From: Mike Keitz <juno.com> mkeitz
To: MITVMA.MIT.EDU < PICLISTMITVMA.MIT.EDU> PICLIST
Date: Sunday, May 03, 1998 7:35 PM
Subject: Re: [OT] windows terminal- output?
I need to write math using word. I need to write integrals and
differential equations and the normal math stuff. But I do not know how to
find the symbol set in word. Does anyone know how to get into the format
for writing the equations?
Click on Insert, then Object, then from the Create New tab select
"Microsoft Equation 3.0". You are now in the equation editor and can build
the equation. You need to have selected equation editing when you
On Sun, 3 May 1998, Rich Graziano wrote:
> I need to write math using word. I need to write integrals and
> differential equations and the normal math stuff. But I do not know how to
> find the symbol set in word. Does anyone know how to get into the format
> for writing the equations?
Ron Kreymborg Computer Systems Manager
Monash University CRC for Southern Hemisphere Meteorology
Clayton, VIC 3168 Phone : 061-3-9905-9671
Australia Fax : 061-3-9905-9689
More... (looser matching)
- Last day of these posts
- In 1998
, 1999 only
- New search...