Searching \ for '[EE]: Good (and cheap) PCB manufacturer' in subject line. ()
Make payments with PayPal - it's fast, free and secure! Help us get a faster server
FAQ page: techref.massmind.org/techref/pcbs.htm?key=pcb
Search entire site for: 'Good (and cheap) PCB manufacturer'.

Exact match. Not showing close matches.
PICList Thread
'[EE]: Good (and cheap) PCB manufacturer'
2001\10\11@192548 by joan

flavicon
face
Hi, PicListers,

I have been searching our list for PCB manufacturers,
collected some web addresses, had a look at them,
made some elementary arithmetics and concluded that two
good options could be :

run.to/pcb (Bulgaria) 2 side, 16.25$/dm2 (solder mask
           and component marks included)
http://www.pcb-pool.com (UK) 2 side, 30$(1 item)-9$(50 item)/dm2
                (solder mask and component marks included)

I would greatly appreciate the opinion of people having
had deals with them. What is the procedure followed to pay
the PCBs made in Bulgaria ? Are there other cheap options
to consider ?

Thanks !

--------------------------------------------------------------
    Joan Ilari                 e-mail : spam_OUTjoanTakeThisOuTspamilari.org
    Barcelona                   www   : http://www.ilari.org
    Spain                      Voice  : +34 93 431 96 39

"I've seen things you people wouldn't believe. Attack ships on
fire off the shoulder of Orion. I watched C-beams glitter in
the dark near the Tannhauser gate. All those moments will be
lost in time, like tears in rain. Time to die..."
                                              -Blade Runner-
---------------------------------------------------------------

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


2001\10\16@084902 by Bond, Peter

flavicon
face
Hi Joan -

> I would greatly appreciate the opinion of people having
> had deals with them. What is the procedure followed to pay
> the PCBs made in Bulgaria ? Are there other cheap options
> to consider ?

I just bought some protoboards from Olimex (Bulgaria), and have to say I'm
very pleased with the service.  Tsvetan was very quick to respond to my
queries, delivery was fast and the quality of the boards is good too.
(Certainy better than my homebrews... <G>)

Payment was by credit card; there was the slightly awkward - IMO - fun of
faxing the PO with my CC number on it, but perhaps I've become too enamoured
of online ordering.

Cost was a major factor - the 8 pin protoboards I bought for $2.50 each,
whilst the going rate for similar boards is £10 here.  
I'll certainly be using them again.

Peter
This email, its content and any attachments is PRIVATE AND CONFIDENTIAL to
TANDBERG Television. If received in error please notify the sender and
destroy the original message and attachments.

--
http://www.piclist.com hint: The PICList is archived three different
ways.  See http://www.piclist.com/#archives for details.


More... (looser matching)
- Last day of these posts
- In 2001 , 2002 only
- Today
- New search...