piclist new200809

 

ON 20080904@3:58:31 PM at page:
http://www.piclist.com/piclist/support.htm#39695.4209490741
James Newton[JMN-EFP-786] removed post 39695.4209490741

|Delete '

  <LI>'



ON 20080908@11:04:17 AM at page:
http://www.piclist.com/piclist/projects.htm#39698.9946759259
James Newton[JMN-EFP-786] removed post 39698.9946759259

 with comment: 'The electrical noise from the sliding (rolling?) contacts on the train will disrupt most means of communication. You would need to use VERY low baud rate serial (see I/O then RS232 in the main FAQ page) with an RC network or debounce routine to compensate for the noise, or try a low power RF system (I/O, RF) which would transmit the signal through the gaps.'

|Delete '

  <LI>'



ON 20080918@4:13:30 PM at page:
http://www.piclist.com/piclist/index.htm#39709.5690856481
James Newton[JMN-EFP-786] removed post 39709.5690856481

|Delete '
</BODY>'



ON 20080923@4:40:12 PM at page:
http://www.piclist.com/piclist/projects.htm#39714.1147685185
James Newton[JMN-EFP-786] removed post 39714.1147685185

|Delete '

  <LI>'



ON 20080923@4:40:36 PM at page:
http://www.piclist.com/techref/piclist/projects.htm#39445.166724537
James Newton[JMN-EFP-786] published post 39445.166724537' but after: '<A TITLE="'.



ON 20080923@4:40:47 PM at page:
http://www.piclist.com/techref/piclist/projects.htm#39714.1154513889
James Newton[JMN-EFP-786] removed post 39714.1154513889

|Delete '

   <LI>'

  .