A universal programmer that operates independant of operating system, can program any device via "daughter boards"(DBs) which are adaptor boards that will plug into the main board. The Main Board (MB) will have various circuits designed to provide compatability with almost any device. There will be a power supply board that is seperate, due to the large amount of argument surrounding that subject. There will also be a one time programming board to get the firmware onto the MCU on the MB. And, there will be a board for communication interfacing so that the programmer will not be resricted to any specific protocol.
file: /Techref/piclist/cump/bjmcump1.htm, 3KB, , updated: 2003/4/25 02:01, local time: 2024/12/2 14:50,
owner: BJM-bigfoot-486,
18.97.14.89:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/piclist/cump/bjmcump1.htm"> Brendan's original CUMP specification</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.