please dont rip this site

Volumn Conversions

Rectangle length width height in meters, cm, yards, feet, inches to volumn in liters, cubic meters or feet, and gallons as well as weight in kg or lb.

Cylinder radius and depth in meters, cm, yards, feet, inches to volumn in liters, cubic meters or feet, and gallons as well as weight in kg or lb.

Cone radius and depth in meters, cm, yards, feet, inches to volumn in liters, cubic meters or feet, and gallons as well as weight in kg or lb.

Cylinder radius and depth with conical bottom having depth in meters, cm, yards, feet, inches to volumn in liters, cubic meters or feet, and gallons as well as weight in kg or lb.

Irregular pond with surface area in hectares, acres, sq miles, sq meters, sq yards, sq feet, with depth in meters, cm, yards, feet, inches to volumn in liters, cubic meters or feet, and gallons as well as weight in kg or lb.

From the top
it looks like:		 Rectangle Width
Height
Circle Radius
Irregular Surface
area
From the side
it looks like:		 Rectangle
or cylinder		 Depth
Cone Depth
Both
(cylinder w/
conical bottom)
Volumn Liters
Cubic
meters
Cubic
feet
Gallons
Weight Kg
Lbs

file: /Techref/other/pond/tilapia/conversions.htm, 6KB, , updated: 2011/3/10 00:38, local time: 2024/12/20 03:46,
TOP NEW HELP FIND: 
3.145.199.182:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/other/pond/tilapia/conversions.htm"> Volumn Conversions</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .