please dont rip this site
previous | start | next


SET

Displays, sets, or removes cmd.exe environment variables.

SET [variable=[string]]

  variable  Specifies the environment-variable name.
  string    Specifies a series of characters to assign to the variable.

Type SET without parameters to display the current environment variables.

If Command Extensions are enabled SET changes as follows:

SET command invoked with just a variable name, no equal sign or value
will display the value of all variables whose prefix matches the name
given to the SET command.  For example:

    SET P

would display all variables that begin with the letter 'P'

SET command will set the ERRORLEVEL to 1 if the variable name is not
found in the current environment. As far as I can see, it does NOT set
the error level to 0 if the variable name is found. Use

    VERIFY > NUL

to clear the errorlevel.

SET command will allow an equal sign (=) in the value of an environment
variable in any position other than the first character.

A new switch is added to the SET command:

    SET /A expression

The /A switch specifies that the string to the right of the equal sign
is a numerical expression that is evaluated.  The expression evaluator
is pretty simple and supports the following operations, in decreasing
order of precedence:

    ()                  - grouping
    * / %               - arithmetic operators
    + -                 - arithmetic operators
    << >>               - logical shift
    &                   - bitwise and
    ^                   - bitwise exclusive or
    |                   - bitwise or
    = *= /= %= += -=    - assignment
      &= ^= |= <<= >>=
    ,                   - expression separator

If you use any of the logical or modulus operators, you will need to
enclose the expression string in quotes.  Any non-numeric strings in the
expression are treated as environment variable names whose values are
converted to numbers before using them.  If an environment variable name
is specified but is not defined in the current environment, then a value
of zero is used.  This allows you to do arithmetic with environment
variable values without having to type all those % signs to get their
values.  If SET /A is executed from the command line outside of a
command script, then it displays the final value of the expression.  The
assignment operator requires an environment variable name to the left of
the assignment operator.  Numeric values are decimal numbers, unless
prefixed by 0x for hexidecimal numbers, 0b for binary numbers and 0 for
octals numbers.  So 0x12 is the same as 0b10010 is the same as 022.
Please note that the octal notation can be confusing: 08 and 09 are
not valid numbers because 8 and 9 are not valid octal digits.

Environment variable substitution has been enhanced as follows:

    %PATH:str1=str2%

would expand the PATH environment variable, substituting each occurrence
of "str1" in the expanded result with "str2".  "str2" can be the empty
string to effectively delete all occurrences of "str1" from the expanded
output.  "str1" can begin with an asterisk, in which case it will match
everything from the begining of the expanded output to the first
occurrence of the remaining portion of str1.

    %PATH:~10,5%

would expand the PATH environment variable, and then use only the 5
characters that begin at the 11th (offset 10) character of the expanded
result.

Back to the top of this page  



previous | start | next

file: /Techref/os/win/winnt/slide60.htm, 4KB, , updated: 2004/5/26 14:03, local time: 2024/11/8 16:48,
TOP NEW HELP FIND: 
13.59.46.85:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/os/win/winnt/slide60.htm"> Help for all NT Version 4.0 commands</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .