Checks a disk and displays a status report. CHKDSK [drive:][[path]filename] [/F] [/V] [/R] [/L[:size]] [/I] [/C] [drive:] Specifies the drive to check. filename Specifies the file(s) to check for fragmentation (FAT only). /F Fixes errors on the disk. /V FAT only: Displays the full path and name of every file on the disk. /R Locates bad sectors and recovers readable information (implies /F). /L:size NTFS only: changes the log file size to the specified number of kilobytes. If size is not specified, displays current size. /I NTFS only: Performs a less vigorous check of index entries. /C NTFS only: Skips checking of cycles within the directory tree. The /I or /C switch reduces the amount of time required to run chkdsk by skipping certain checks of the volume.
file: /Techref/os/win/winnt/chkdsk.htm, 1KB, , updated: 2004/5/26 15:10, local time: 2024/8/31 20:17,
18.189.171.134:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/os/win/winnt/chkdsk.htm"> Help for all NT Version 4.0 commands</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.