please dont rip this site Prev Next

OUTLINETEXTMETRIC info  Overview  Group

The OUTLINETEXTMETRIC structure contains metrics describing a TrueType font.

typedef struct _OUTLINETEXTMETRIC { // otm 

    UINT   otmSize; 

    TEXTMETRIC otmTextMetrics; 

    BYTE   otmFiller; 

    PANOSE otmPanoseNumber; 

    UINT   otmfsSelection; 

    UINT   otmfsType; 

    int    otmsCharSlopeRise; 

    int    otmsCharSlopeRun; 

    int    otmItalicAngle; 

    UINT   otmEMSquare; 

    int    otmAscent; 

    int    otmDescent; 

    UINT   otmLineGap; 

    UINT   otmsCapEmHeight; 

    UINT   otmsXHeight; 

    RECT   otmrcFontBox; 

    int    otmMacAscent; 

    int    otmMacDescent; 

    UINT   otmMacLineGap; 

    UINT   otmusMinimumPPEM; 

    POINT  otmptSubscriptSize; 

    POINT  otmptSubscriptOffset; 

    POINT  otmptSuperscriptSize; 

    POINT  otmptSuperscriptOffset; 

    UINT   otmsStrikeoutSize; 

    int    otmsStrikeoutPosition; 

    int    otmsUnderscoreSize; 

    int    otmsUnderscorePosition; 

    PSTR   otmpFamilyName; 

    PSTR   otmpFaceName; 

    PSTR   otmpStyleName; 

    PSTR   otmpFullName; 

} OUTLINETEXTMETRIC; 

 

Members

otmSize
Specifies the size, in bytes, of the OUTLINETEXTMETRIC structure.
otmTextMetrics
Specifies a TEXTMETRIC structure containing further information about the font.
otmFiller
Specifies a value that causes the structure to be byte aligned.
otmPanoseNumber
Specifies the PANOSE number for this font.
otmfsSelection
Specifies the nature of the font pattern. This member can be a combination of the following bits:

Bit

Meaning

0

Italic

1

Underscore

2

Negative

3

Outline

4

Strikeout

5

Bold

otmfsType
Specifies whether the font is licensed. Licensed fonts must not be modified or exchanged. If bit 1 is set, the font may not be embedded in a document. If bit 1 is clear, the font can be embedded. If bit 2 is set, the embedding is read-only.
otmsCharSlopeRise
Specifies the slope of the cursor. This value is 1 if the slope is vertical. Applications can use this value and the value of the otmsCharSlopeRun member to create an italic cursor that has the same slope as the main italic angle (specified by the otmItalicAngle member).
otmsCharSlopeRun
Specifies the slope of the cursor. This value is zero if the slope is vertical. Applications can use this value and the value of the otmsCharSlopeRise member to create an italic cursor that has the same slope as the main italic angle (specified by the otmItalicAngle member).
otmItalicAngle
Specifies the main italic angle of the font, in tenths of a degree counterclockwise from vertical. Regular (roman) fonts have a value of zero. Italic fonts typically have a negative italic angle (that is, they lean to the right).
otmEMSquare
Specifies the number of logical units defining the x- or y-dimension of the em square for this font. (The number of units in the x- and y-directions are always the same for an em square.)
otmAscent
Specifies the maximum distance characters in this font extend above the base line. This is the typographic ascent for the font.
otmDescent
Specifies the maximum distance characters in this font extend below the base line. This is the typographic descent for the font.
otmLineGap
Specifies typographic line spacing.
otmsCapEmHeight
Not supported.
otmsXHeight
Not supported.
otmrcFontBox
Specifies the bounding box for the font.
otmMacAscent
Specifies the maximum distance characters in this font extend above the base line for the Macintosh® computer.
otmMacDescent
Specifies the maximum distance characters in this font extend below the base line for the Macintosh® computer.
otmMacLineGap
Specifies line-spacing information for the Macintosh® computer.
otmusMinimumPPEM
Specifies the smallest recommended size for this font, in pixels per em-square.
otmptSubscriptSize
Specifies the recommended horizontal and vertical size for subscripts in this font.
otmptSubscriptOffset
Specifies the recommended horizontal and vertical offset for subscripts in this font. The subscript offset is measured from the character origin to the origin of the subscript character.
otmptSuperscriptSize
Specifies the recommended horizontal and vertical size for superscripts in this font.
otmptSuperscriptOffset
Specifies the recommended horizontal and vertical offset for superscripts in this font. The superscript offset is measured from the character base line to the base line of the superscript character.
otmsStrikeoutSize
Specifies the width of the strikeout stroke for this font. Typically, this is the width of the em dash for the font.
otmsStrikeoutPosition
Specifies the position of the strikeout stroke relative to the base line for this font. Positive values are above the base line and negative values are below.
otmsUnderscoreSize
Specifies the thickness of the underscore character for this font.
otmsUnderscorePosition
Specifies the position of the underscore character for this font.
otmpFamilyName
Specifies the offset from the beginning of the structure to a string specifying the family name for the font.
otmpFaceName
Specifies the offset from the beginning of the structure to a string specifying the typeface name for the font. (This typeface name corresponds to the name specified in the LOGFONT structure.)
otmpStyleName
Specifies the offset from the beginning of the structure to a string specifying the style name for the font.
otmpFullName
Specifies the offset from the beginning of the structure to a string specifying the full name for the font. This name is unique for the font and often contains a version number or other identifying information.

Remarks

The sizes returned in OUTLINETEXTMETRIC are given in logical units; that is, they depend on the current mapping mode of the specified display context.

See Also

GetOutlineTextMetrics, LOGFONT, TEXTMETRIC 

See:


file: /Techref/os/win/api/win32/struc/src/str13.htm, 9KB, , updated: 2001/6/26 09:44, local time: 2024/12/5 23:42,
TOP NEW HELP FIND: 
18.97.9.170:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/os/win/api/win32/struc/src/str13.htm"> OUTLINETEXTMETRIC</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .