The AngleArc function draws a line segment and an arc. The line segment is drawn from the current position to the beginning of the arc. The arc is drawn along the perimeter of a circle with the given radius and center. The length of the arc is defined by the given start and sweep angles.
BOOL AngleArc(
HDC hdc, |
// handle to device context |
int X, |
// x-coordinate of circle’s center |
int Y, |
// y-coordinate of circle’s center |
DWORD dwRadius, |
// circle’s radius |
FLOAT eStartAngle, |
// arc’s start angle |
FLOAT eSweepAngle |
// arc’s sweep angle |
); |
If the function succeeds, the return value is nonzero.
If the function fails, the return value is zero. To get extended error information, call GetLastError.
The AngleArc function moves the current position to the ending point of the arc.
The arc drawn by this function may appear to be elliptical, depending on the current transformation and mapping mode. Before drawing the arc, AngleArc draws the line segment from the current position to the beginning of the arc.
The arc is drawn by constructing an imaginary circle around the specified center point with the specified radius. The starting point of the arc is determined by measuring counterclockwise from the x-axis of the circle by the number of degrees in the start angle. The ending point is similarly located by measuring counterclockwise from the starting point by the number of degrees in the sweep angle.
If the sweep angle is greater than 360 degrees, the arc is swept multiple times.
This function draws lines by using the current pen. The figure is not filled.
file: /Techref/os/win/api/win32/func/src/f02_3.htm, 4KB, , updated: 2000/4/7 12:19, local time: 2024/8/17 12:44,
3.144.92.132:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/os/win/api/win32/func/src/f02_3.htm"> AngleArc</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.