PIC Microcontoller Input / Output Methods

For Servo Controls

Dale Botkins CCS ServoTst

JP Browns CCS Servo code

Servo Control Demo

General Servo Methods

See also:

• http://home.planet.nl/~havinga1/servo/servo.htm 16F84 Based RC Servo Controller with preset. 12 servos in parallel with a resolution of 240 steps over 90 degrees rotation. serial port with a rate of 38400 baud.+
• http://www.digitalnemesis.com/ash/projects/picservo/ PIC Based Serial Port Servo Controller By Ashley Roll
• http://www.verinet.com/~dlc/projects/botproj.htm#serserv code for servo control from a 12C508.
• http://webhome.idirect.com/~bine for 16c84 code to drive several servos.
• http://www.rentron.com/servo.htm
• http://www.rentron.com/SerialServo.htm
• http://academic1.bellevue.edu/robots/ssc1684.html ( cached 20011108101510 ) 16F84 serial 6 servo controller. No jitter, 9600 baud, back to back updates.
• http://www.eagleairaust.com.au/ - RC and Servo, Hitech C sample code.
• http://www.markworld.com/microtools.html
• http://www.merlotti.com/EngHome/Computing/software.htm RC servo interface with Win32 GUI control application. All code in Pascal (mikropascal or Delphi)

Archive:

• PICList post "Driving a servo?"
• PICList post "Driving a servo?"

Questions:

• http://www.laureanno.com/RC amir m.usman wagdarikar of walchand college of engg. replies: i do not geting the idea how to write the machine code for the interfacing of 4*4 keypad&servomotor to the 16f877 +

  +

• STOPspamcarontanmeina-Remove- at yahoo.com asks:

  how to program a 6V DC servo motor as to control it's phase(30, 60,90 and 120) turning using PIC16F84? i don't understand how to write the code even i have read its data sheet and manual. could u help me in it, urgent?

  +

Interested:

  .