please dont rip this site

http://www.microchip.com/Download/Appnote/Category/rDesigns/40171a.pdf is an app note for a Lamp Dimmer for the PIC12C508

Fansler, David says:

  1. The schematic does not totally match the article
  2. The load would go between Hot Out and [Return].
  3. You would supply a Neutral (white wire) to Return.
  4. You would supply Hot (balck wirefrom power company) to Hot In
  5. Ground (green) is a good idea. It can be tied to Neutral (which is done in US breaker boxes).

    Dave Bell says (Paul B. Webster and Donald Budette aggree)
  6. Don't! This is done in US breaker boxes, *but that's the only legal place to do it*! The Green/Grounding conductor should go to case ground if there is a metal case, and not be tied to the circuit anywhere.
  7. Vcc is generated by the circuit above the PIC (RV1, R1,2, C1-3, D1-3)
  8. I would take JP1 to be an external input to allow control of the circuit by an outside source (another PIC, automation system, etc.)
  9. While simple, a fair warning is given in the article that this circuit has no isolation from the AC main and therefore can bite you!
  10. If used for lighting purposes, this circuit will produce filament hum at low light levels (larger filaments hum more) A large choke in line with the load will kill the hum.

Donald Burdette says:

Speaking of GFCI breakers, I would recommend that this circuit be plugged in through one. It will reduce some of the dangers mentioned above.

M. Admin Davis says:

...note that the triac should ALWAYS be considered to be on. If the only load is a neon bulb, for instance, it won't turn off since it draws so little current.

You might want to:

Questions:

See also:


file: /Techref/microchip/lampdim.htm, 8KB, , updated: 2007/12/22 19:17, local time: 2024/12/21 05:49,
TOP NEW HELP FIND: 
3.137.168.223:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/microchip/lampdim.htm"> MicroChip 12C508 Lamp Dimmer</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .