Where # is one of 96,100,120,144, 150,160,180,200, 225,240,288,300, 360,400,450,480, 600,720,800,900, 1200,1440,1800, 2400,2600,7200
This setting is local to the current print environment and is defaulted and restored when calling a macro.
I have seen several instances where executing a macro that has not been defined (e.g. esc&f30000Yesc&f2X) results in the Unit of Measure being reset the default setting for the printer. Apparently, there is a small bug in the PCL interpreter in some printers (6P, 4000) that causes the restoration of the setting to not occur when the macro is not found.
|file: /Techref/language/pcl/unitofmeasure.htm, 0KB, , updated: 2003/6/16 11:59, local time: 2018/11/22 03:45,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/language/pcl/unitofmeasure.htm"> HP PCL Unit Of Measure Command</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!