SHADOW TEXT USING PCL5 PRINT MODELLegend: Ec = [Ctrl] [P] [Escape] in Dos EDIT The following print model commands demonstrate how to perform shadow printing on PCL 5 printers: Ec*v0N--Specifies the character and character cell (source image) as transparent. Ec*v1O--Specifies that the characters (pattern) be printed in an opaque mode. Ec*c#G--Specifies a percentage of shade in the printed characters. Ec*v2T--Allows the characters (pattern) to be printed as shaded characters rather than black characters. EXAMPLE EcE Reset. Ec*p1500y300X Absolute Cursor Position vertically 1500 dots and horizontally 300 dots. Ec*v0N Sets source transparency mode as transparent. Ec*v1O Sets pattern transparency mode as opaque. Ec(s1p200v1s3b4101T 200 point CG Times font. Ec*c70G 70% Gray shading. Ec*v2T HP defined shading pattern. CSC Text Ec*p1525y325X Absolute Cursor Position vertically 1525 dots and horizontally 325 dots. Ec*c90G 90% Gray shading. Ec*v2T HP defined shading pattern. CSC Text Ec*p1550y350X Cursor position. Ec*c100G 100% Gray shading. Ec*v2T HP defined shading pattern. CSC Text EcE Reset. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1719.htm, 2KB, , updated: 2005/4/29 10:56, local time: 2023/2/4 11:40,
|©2023 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/language/pcl/lj1719.htm"> language pcl lj1719</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!