JOB CONTROL COMMANDS DUPLEX / SIMPLEX DEFINITION This Command (Ec&l#S) designates either simplex or duplex printing for duplex printers. The l is equivalent to a lower case L. Simplex mode prints an image on only one side of the page. Duplex mode prints images on both sides of a page. # = 0 Simplex (The number zero) # = 1 Duplex, Long Edge Binding (11"edge of paper) # = 2 Duplex,Short-Edge Binding (8 1/2" edge of paper) EXAMPLE The following is an example of switching from duplex to simplex within the same job. EcE Printer Reset Ec&l1X Number of copies = 1 Ec&l1S Duplex Long Edge Binding Page 1 side 1 Text Ec&a0G Page Side Selection (Next Side) Page 1 side 2 Text Ec&l0H Eject Page Ec&l0S Simplex Printing This is a page 2 simplex Text Ec&l1S Duplex Long Edge Binding Page 3 side 1 Text Ec&a0G Page Side Selection (Next Side) Page 3 side 2 Text EcE Printer Reset (Eject Page) LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1549.asc, 1KB, , updated: 1993/11/15 15:55, local time: 2018/2/20 07:59,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/language/pcl/lj1549.asc"> language pcl lj1549</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!