SOLUTION: The procedure to enter PCL, HP-GL/2, and PJL commands in a UNIX environment is the same as for the DOS environment in every aspect except for the escape character itself. The procedure for entering the escape character is detailed below.
NOTE: The escape character always shows up as ^[. If it does not, an incorrect character has been entered.
|file: /Techref/language/pcl/escunix.htm, 1KB, , updated: 2007/11/14 14:47, local time: 2018/5/23 17:24,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/language/pcl/escunix.htm"> Entering escape sequences in UNIX using VI.</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!