please dont rip this site

Forms overlay from MS Word for Windows

  1. In MS Word version 6 through 8 (aka MS Word '97), position your cursor at the very begining of the document. If the document has a header, open the header (View / Header/Footer); if the document does not have a header, move to the top of the document.  Select Insert and then Field.  From the [all] Category, select the Print field name.  In the Field Codes text edit control, add 27"&f#y4X" (including the quotes )after the word PRINT ; replace the # with the macro ID of the form, signature or logo.  For example: if the form macro ID number is 91, enter 27"&f91y4X". Click on OK to insert the field.
  2. Select Tools / Options and the View tab. In the Show area check the Field Codes checkbox. Click on OK.
  3. Locate the field on the page (it will appear inside {curly braces}) and verify that it appears as:
       {PRINT 27"&f#y4X" \*MERGEFORMAT }
    where # is replaced by the macro ID of the form, signature or logo. The 27 will be translated into an ASCII Escape character
  4. Turn off the field-code display turned on in step 2, by unchecking the Field Codes checkbox.
  5. Print the form.

See also:

Document Q135569 from the Microsoft Knowledge Base.
file: /Techref/language/pcl/escmswrd.htm, 1KB, , updated: 2002/10/22 16:24, local time: 2018/8/16 09:20,
TOP NEW HELP FIND: 
54.225.57.230:LOG IN

 ©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://techref.massmind.org/techref/language/pcl/escmswrd.htm"> Forms overlay from MS Word for Windows</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .