please dont rip this site

Stepper Motor wiring

How to figure out the internal wiring of a stepper motor using an Oscilloscope

Also see: other methods if figuring out stepper motor wiring

Rodney McLatchy says: "...attach A+ and A- to 2 probes of the scope common to ground, and spin the shaft by hand. On the screen they should come out 180degee. out of phase. If one phase is backwards they would look the same. Or if I mixed an A with a B, 90degees out."

Motor wiring diagrams (for reference)

See also:

NEW! Roman Black's Linistep 1. stepper controller kit Proceeds support PICList.com


file: /Techref/io/stepper/wiresscope.htm, 1KB, , updated: 2011/2/25 17:53, local time: 2024/3/29 01:54,
TOP NEW HELP FIND: 
174.129.140.206:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/io/stepper/wiresscope.htm"> Stepper Motor wiring with an Oscilloscope</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .