Since modes have been defined that allow the peripheral to send 8 bits of data back to the host over the data lines, it is possible for both the host and the peripheral to be driving the data lines at the same time. This can result in damage to the host port or the peripheral port or both. This would be very, very rare in normal operation but the following possiblilitys arise:
|file: /Techref/io/parallel/datacrsh.htm, 1KB, , updated: 2006/6/27 13:18, local time: 2019/6/27 04:27,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/io/parallel/datacrsh.htm"> io parallel datacrsh</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!