Interrupt 29h (not documented by Microsoft)* Internal - Quick Screen Output
This method is extremely fast (much faster than Int\21f\02 and Int\21f\09,
for example), and it is portable, even to "non-compatible" MS-DOS computers.
entry AL character to output to screen
return unknown
note 1) Documented by Digital Research's DOS Reference as provided with the
DEC Rainbow
2) If device\driver\ANSI.SYS is installed, character output is filtered
through it.
3) Works on the IBM PC and compatibles, Wang PC, HP-150 and Vectra, DEC
Rainbow, NEC APC, Texas Instruments PC and others
4) This interrupt is called from the DOS's output routines if output is
going to a device rather than a file, and the device\drivers
struct -device attribute code word has bit 3 (04h) set to "1".
5) This call has been tested with MSDOS 2.11, PCDOS 2.1, PCDOS 3.1, PCDOS
3.2, and PCDOS 3.3.
6) Used in IBMBIO.COM as a vector to Int\10f\0E (write TTY)
followed by an IRET.
file: /Techref/int/29.htm, 1KB, , updated: 1999/2/20 10:27, local time: 2024/12/25 11:22,
3.148.144.139:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/int/29.htm"> int 29</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.