Function 1Fh Get Default Drive Parameter Block* Same as function call 32h (below), except that the table is accessed from
the default drive
entry AH 1Fh
other registers unknown
return AL 00h no error
0FFh error
DS:BX points to DOS Disk Parameter Block for default drive.
note 1) Unknown vector returned in ES:BX.
2) For DOS 2.x and 3.x, this just invokes Int\21f\32 (undocumented, Read
DOS Disk Block) with DL=0
file: /Techref/int/21f/1f.htm, 0KB, , updated: 1999/4/26 11:31, local time: 2024/11/28 00:32,
18.219.253.199:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/int/21f/1f.htm"> int 21f 1f</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.