please dont rip this site
Interrupt 14h	Initialize and Access Serial Port For Int 14

(0:0050h)

Int Function Description

---------==- ---------------------------------------------------------------

Int\14f\00 Initialize And Access Serial Communications Port

Int\14f\01 Send Character in AL to Comm Port DX (0 or 1)

Int\14f\02 Wait For A Character From Comm Port DX

Int\14f\03 Fetch the Status of Comm Port DX (0 or 1)

Int\14f\04 Extended Initialize (PC Convertible)

Int\14f\05 Extended Communication Port Control (PS/2)

All routines have AH=function number and DX=RS232 card number (0 based).

AL=character to send or received character on exit, unless otherwise noted.

serial status byte:

bits 0 delta clear to send

1 delta data set ready

2 trailing edge ring detector

3 delta receive line signal detect

4 clear to send

5 data set ready

6 ring indicator

7 receive line signal detect

line status byte:

bits 0 data ready

1 overrun error

2 parity error

3 framing error

4 break detect

5 transmit holding register empty

6 transmit shift register empty

7 time out note: if bit 7 set then other bits are invalid

port parameter byte

Byte BBBPPSLL

BBB baud rate: 110,150,300,600,1200,2400,4800,9600

PP parity: 01 = odd, 11 = even

S stop bits: 0 = 1, 1 = 2

LL word length: 10 = 7-bits, 11 = 8-bits

see also NS\16550AF National Semiconductor 16550AF Advantages & Detection




file: /Techref/int/14.htm, 1KB, , updated: 1999/2/20 10:27, local time: 2024/12/25 11:50,
TOP NEW HELP FIND: 
18.191.14.104:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/int/14.htm"> int 14</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .