Why replys to list server postings sometimes go to the poster and other times go to the list: Bob Drzyzgula says:
It depends on whether or not the sender includes a Reply-To: header in their original message. If no Reply-To: is set, the PICLIST L-Soft processor inserts a Reply-To: for the list. If there is a Reply-To:, the list processor leaves it alone.
My messages always do have a Reply-To:, so if you try to do a simple reply to this message, it should just go to me. If you do a reply-to-all or group reply (most mailers have such a function), then it should come up going to me *and* to the list. Also, if you do a reply-to-all or group reply to PICLIST posts from people who *do not* set their Reply-To:, then your reply should simply go to the list, as if you had done a simple reply. Therefore, the best policy to use when replying to a PICLIST post is to *always* use a group reply, which is what you really mean to do, n'est pas?
|file: /Techref/emails.htm, 4KB, , updated: 2002/9/22 18:17, local time: 2018/7/15 17:48,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/emails.htm"> emails</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!