TIME+Displaying the Current TimeDisplays the current time and allows you to reset the time.
VERSION
PC-DOS 2.0+ (revised from 1.0; revised again in 3.3)
MS-DOS equivalent: TIME (2.0+; revised from 1.0)
TYPE
Internal
SYNTAX
TIME [hh:mm[:ss[.xx]]]
OPTIONS
hh Hours
mm Minutes
ss Seconds
.xx Hundredths of seconds
EXAMPLES
TIME 21:30
sets the time to 21:30:00:00 (9:30 p.m.).
TIME
returns the current time as indicated by the system clock and
prompts you for a new time. You can accept the current time by
pressing Return.
MESSAGE
Invalid time
Reenter the time in the correct format, with a colon (:) between
hours and minutes as well as between minutes and seconds. Use a
period (.) between seconds and hundredths of a second.
UNDO
If you set the time incorrectly, use the TIME command a
second time and enter the current time.
NOTE
In version 3.3 of PC-DOS, the TIME command also changes the
permanent clock, if the system has one.
------------------------------------------------------------------
[For related topics, press R]
SEE ALSO
DATE Command
file: /Techref/dos/command/time.htm, 1KB, , updated: 1999/2/20 10:24, local time: 2024/11/26 11:07,
18.118.227.199:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/techref/dos/command/time.htm"> dos command time</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.