please dont rip this site

Atmel AT89S Series ISP 8051 type Microcontrollers

The 8051 equivalent with 256 bytes of internal RAM, 3 Timers/Counters, UART, WDT, SPI interface, accepts external memories (code/ram), 32 port pins, runs up to 24MHz (2MIPS), $3.86 at NetBuy, 8051 free compiler at the Internet, and the serial Flash programming using just 4 wires connected directly to the PC printer port... need no special programmer... software available for free at http://www.ustr.net ...

Distributed by:

I have being using the AT89S8252 without any complain or problems. The extra timer, the 256 bytes of internal RAM and the best of all, the serialy programmable 8k flash code using only 4 pins of your PC parallel port, allows you to download new code more than one thousand times. As a rule, I leave those 4 wires (ground, Reset and 2 pin ports) available at a RJ11 connector just for that purpose, so upgrades can be done at the field by the customer.

Questions:

Comments:


file: /Techref/atmel/at89s8252.htm, 3KB, , updated: 2013/7/22 16:13, local time: 2024/11/21 14:39, owner: size111-hotmail-,
TOP NEW HELP FIND: 
3.147.82.252:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/techref/atmel/at89s8252.htm"> Atmel At89S8252</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 
Quick, Easy and CHEAP! RCL-1 RS232 Level Converter in a DB9 backshell
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .