Each component has a number of properties assigned to it that can be seen by left clicking the component followed by clicking edit properties. The most important of these properties is the footprint. The footprint property name should match with the name of the footprint library in the Layout.
Left click on the connector. Click Edit Properties and browse horizontally and come to the property Name PCB Footprint. Enter HEADER2 in the blank column just below PCB FOotprint.
Repeat the similar thing with the Resistor and the Diode and add the PCB Footprint names as shown in the table below.
It is possible that some of the nets remain unconnected or are cross connected. The OrCAD will catch the basic errors. However, most errors are manual errors and you must check it repeatedly for any error in the Schematics.
Click on Tools -> Design Rules Check, keeo view output checked and hit ok to check for any Design error.
We will finally generate the netlist that can be imported in PADS or any other PCB design software. This particular method is only for PADS but it can be extended to any other other tool in a similar fashion.
Click on tools -> Create Netlist. In the window that follow click others. In Formatter, browse down and click pads2k. Keep the view ouput checked. Since the PADS accepts .ASC extension, rename the netlist file name to .ASC extension. Click ok and this will generate a netlist file as shown below.
*PADS2000* *PART* D1 LED J1 HEADER2 R1 R0603_1 *NET* *SIGNAL* GND_POWER J1.1 D1.2 *SIGNAL* VCC R1.1 J1.2 *SIGNAL* N000031 D1.1 R1.2 *END*
This completes the basic OrCAD tutorials. You may like to practice it a bit more and then move on to learn few more things including New Library symbol creation, Bus connection, off page creation. You may see this tutorial material present so far in a flash for easy undestanding here ...
In the next page we will see how to create a new Library Symbol.
Next: Creating Library
|file: /Techref/app/orcad_05.htm, 3KB, , updated: 2009/9/29 10:10, local time: 2020/9/25 04:22,
|©2020 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://techref.massmind.org/techref/app/orcad_05.htm"> OrCAD, Generating NetList, Schematic capture, PCB CAD</A>
|Did you find what you needed?|
Welcome to massmind.org!
Welcome to techref.massmind.org!