 |  |
| The most serious work was making the hole for RJ-45 connector. Since the place in which a hole is made is narrow, a tool cannot be used well. | A power supply connector is attached beside RJ-45 connector. It is necessary to check not colliding with the display panel. |
|
 |  |
| Display panel, CPU unit, and display control unit are attached in the case. Since it is the limit of the size of a case, the thick paper cut in the same size as the inner side size of a case is used, and each unit is arranged. | The holes are actually made in paper, each unit is attached, and the position of the holes are checked. |
|
 |  |
| The paper which opened the position of the holes is put into the case, and the holes are made. | The attachment holes of the chain are made in both sides. It is necessary to check not contacting a display panel. |
|
 |  |
| The holes for ventilation are made in the side of the case. Many holes with a diameter of 2.6mm were made. | Since there are many holes, it is the work which requires perseverance. |
|
 |
| This is the photograph which made all the holes. |
