please dont rip this site

SX weak pullup resister

Stephen C. Holland Says:

You have to consider that making a resistor in the CMOS process is difficult at best, and so the weak pullups can be anywhere in a range of values. From the SX datasheet, the weak pullup current at Vdd = 5.5V can be between 100 and 190uA. This means a resistance of 28.9K - 55Kohm. Pretty wide range, and also pretty weak. If you need either a stronger pullup, or an accurate value, an external pullup should be used.
+

file: /Techref/scenix/weakpullup.htm, 0KB, , updated: 2006/6/26 06:27, local time: 2024/12/28 03:03, owner: SCH-NSC-LA7,
TOP NEW HELP FIND: 
3.133.145.168:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/Techref/scenix/weakpullup.htm"> weak pullup resister </A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .