please dont rip this site

SX Camera Interface

CMUCam v1.11 Schematic and Parts List

also: Source Code

Qty Item Part no. (Digi-key) Schematic Label Unit Price
1 75 MIPS Ubicom SX28 SX28AC75/DP-ND IC1 5.18
1 OV6620 Eval Board * BB048* 57.95
1 Maxim 232 Level Shifter MAX232CPE-ND IC3 3.31
1 SG-531 75.00 MHz crystal osc SE2911-ND QG1 5.85
1 5 Volt Regulator LM2940CT-5.0-ND IC2 1.80
3 4.7 Kohm 1/4 Watt Resistor 4.7KQBK-ND R2 R3 R4 0.06
2 220 ohm 1/4 Watt Resistor 220QBK-ND R1 0.06
6 1.0 uF Capacitor P2105-ND C1 C2 C3 C4 C5 C6 0.42
2 SPST Switch EG1847-ND S1 S2 1.11
1 3mm red LED 67-1125-ND LED3MM 0.16
1 3mm green LED 67-1127-ND D1 0.16
2 0.1uF Capacitor P4923-ND C8 C10 0.55
3 100 uF Capacitor P5138-ND C7 C9 C11 0.28
2 14 pin IC socket
(to form a 28 pin socket)		 AE8914-ND IC1 0.32
1 8 pin IC socket ** ED3308-ND QG1 0.42
1 16 pin IC socket ED3316-ND IC3 0.83
1 Double row female header 929852-01-36 JP5 3.35
1 Single row male header 929647-09-36-ND JP1x2 JP3 JP4 JP7 1.83
(1) Polarized 2 pin terminal housing WM2700-ND 0.25
(2) Crimp terminals WM2200-ND 0.13
(1) Polarized 2 pin terminal header WM2000-ND 0.25
(1) Female serial ribbon cable head AFS09G-ND 6.14
(1) Serial ribbon cable socket connector ASC10G-ND 1.11

See also:

file: /Techref/scenix/lib/io/dev/cam/cmucamsch.htm, 3KB, , updated: 2004/12/23 15:03, local time: 2024/11/23 09:33,
TOP NEW HELP FIND: 
3.22.42.189:LOG IN
 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/Techref/scenix/lib/io/dev/cam/cmucamsch.htm"> CMUCam v1.11 Schematic and Parts List</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .