WEEDER FREQUENCY COUNTER

;*********************************************************************
;* WEEDER FREQUENCY COUNTER
;* Fix for 2 line (8x2) displays that were sold as 16x1 displays
;*
;* Because most of these displays lack a controller chip
:* it is required that the code manually sets the address for the 
:* 9th char. That is what this code does.
;*
;* Questions?
;* Drop me an e-mail cklymko@hotmail.com
;* 
;* Scroll through your code and locate "Shift".
;* Paste the following code starting with "Shift" and ending
;* just before the first "sub" command.
;*
;*********************************************************************
shift	btfsc	addcnt,6	;added for 8x2 displays
	goto	shift2		;
;	btfsc	addcnt,3	;
;	goto	line2		;end the 8x2 code
	btfss	addcnt,0	;shift to opposite side of display?
	retlw	0x00
	btfss	addcnt,1
	retlw	0x00
	btfss	addcnt,2
	retlw	0x00
	goto	line2
;	btfss	addcnt,3
	retlw	0x00
	
line2	movlw	0xB8 		;Force the second line.
	addwf	addcnt,f
	bsf	addcnt,7
	movf	addcnt,w
	goto	inst
;*********************************************************************
; added to move back to home position.
;*********************************************************************

shift2	btfsc	addcnt,3	;
	goto	line1	
	btfss	addcnt,0	;shift to opposite side of display?
	retlw	0x00
	btfss	addcnt,1
	retlw	0x00
	btfss	addcnt,2
	retlw	0x00
;	btfss	addcnt,3
	retlw	0x00
line1	movlw	0x39		
	addwf	addcnt,f
	bsf	addcnt,7
	movf	addcnt,w
	goto	inst

Comments:

• microtekspam at KILLspamcenturylink.net

  Thank-you, this is a very nice patch and once I corrected my original WCT5 program with the added config statements it works great on JHD161 displays..

  +

  .