please dont rip this site

PCB Etch Resist via Silkscreen

The original method of printing PCB's was via silkscreen, and not just the silkscreen layer, the entire etch resist, soldermask and the component silkscreen. As the video here shows, the method is still very useful, as long as the board is not very fine pitch. And you can print T-Shirts to go with the boards!


file: /Techref/pcb/etch/silkscreen.htm, 0KB, , updated: 2019/1/20 21:36, local time: 2024/10/8 11:04,
TOP NEW HELP FIND: 
3.237.15.145:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://techref.massmind.org/Techref/pcb/etch/silkscreen.htm"> PCB Etch Resist via Silkscreen</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to massmind.org!

 

Welcome to techref.massmind.org!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .