USING THE LABEL ( LB ) COMMAND The Label command ( LB ) allows you to print text using the currently defined font. For more information see the Updated PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT. EcE Resets the printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1, (black). Even though there is no physical pen, the SP command must be used to enable printing. PA2500,2500; Specifies absolute plotting and moves to (2500,2500). DT*; Defines "*" as a label terminator (non- printing). SD1,21,2,1,4,25,5,0,6,3,7,4148;SS; Designates the 25- point Universe Bold font as the standard font and selects it with the SS command. LBThis is a Label.*; Prints "This is a Label." in the currently selected font. The Label Terminator "*" will not print. Ec%0A Enters PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
file: /Techref/language/pcl/lj2075.asc, 2KB, , updated: 1993/11/15 16:25, local time: 2024/12/4 05:15,
18.97.14.83:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://techref.massmind.org/Techref/language/pcl/lj2075.asc"> language pcl lj2075</A> |
Did you find what you needed? |
Welcome to massmind.org! |
Welcome to techref.massmind.org! |
.